Stopping distance calculator
How far does a car travel before it stops? Enter the speed, the driver’s reaction time and the road surface to get the thinking, braking and total stopping distance.
See it for real: play Park It.
The formula
Stopping a car happens in two stages. First the driver has to notice the hazard and move their foot to the brake; during that reaction time the car carries on at full speed. Then the brakes slow the car with a deceleration limited by how well the tyres grip the road.
dthinking = v tr dbraking = v² / (2 μ g) dtotal = v tr + v² / (2 μ g)
Here v is the speed in m/s, tr the reaction time in seconds, μ (mu) the coefficient of friction between tyre and road and g = 9.81 m/s². The braking formula comes from v² = 2as with the maximum deceleration a = μg: friction can push back on the car with at most μ times its weight. On a slope the calculator uses a = g(μ cos θ + sin θ), so downhill braking takes longer and uphill braking is shorter.
Why speed matters so much
Thinking distance grows in proportion to speed, but braking distance grows with speed squared. Double your speed and the braking distance is four times as long. Going from 30 mph to 40 mph (one third faster) increases the braking distance from 14 m to 24 m, about 1.8 times. The kinetic energy the brakes must turn into heat, ½mv², rises by the same factor, which is why a small rise in speed makes crashes so much more serious.
Highway Code stopping distances
The UK Highway Code (rule 126) gives these typical stopping distances on a dry road for a car with good brakes and tyres and an alert driver:
| Speed | Thinking | Braking | Total |
|---|---|---|---|
| 20 mph (32 km/h) | 6 m | 6 m | 12 m (3 car lengths) |
| 30 mph (48 km/h) | 9 m | 14 m | 23 m (6 car lengths) |
| 40 mph (64 km/h) | 12 m | 24 m | 36 m (9 car lengths) |
| 50 mph (80 km/h) | 15 m | 38 m | 53 m (13 car lengths) |
| 60 mph (97 km/h) | 18 m | 55 m | 73 m (18 car lengths) |
| 70 mph (113 km/h) | 21 m | 75 m | 96 m (24 car lengths) |
Those figures correspond to a reaction time of 0.67 s and a deceleration of about 6.5 m/s² (0.66 g). The Code tells drivers to leave at least double the gap on wet roads and up to ten times as much on icy roads, because braking distances stretch by similar factors.
Typical friction coefficients
- Dry asphalt or concrete: 0.7–0.9 with good tyres. ABS helps keep the tyres near their peak grip.
- Wet road: 0.4–0.6, lower with worn tread. The legal minimum tread depth in the UK is 1.6 mm.
- Packed snow: about 0.2–0.3.
- Ice: 0.05–0.15, and lower still for wet ice near 0 °C.
Assumptions and limits
- Constant deceleration. Real brakes take a fraction of a second to build up pressure, and heavy vehicles such as lorries and buses brake more gently, so their distances are longer.
- Reaction time is the big unknown. 0.67 s is for an alert driver expecting to brake. Studies of surprised drivers often find 1.5 s; looking at a phone can make it several seconds, which at 30 mph adds 13 m for every extra second.
- Tyres, load and brakes. Under-inflated or worn tyres, a heavily loaded car and hot brakes all lengthen the distance.
Everyday uses
- Driving theory test: checking the Highway Code figures and understanding where they come from.
- Following distance: the two-second rule leaves 27 m at 30 mph and 63 m at 70 mph; in the wet, double it.
- Road safety lessons: showing why 20 mph zones near schools matter. At 20 mph a car stops in 12 m; at 30 mph, at the point where the slower car has stopped, the faster one is still doing about 26 mph.
Practise stopping exactly where you mean to in Park It, including a level on black ice where the same brake pedal barely slows the car at all.
Worked example
A car on a dry motorway at 70 mph (31.3 m/s). The driver takes 0.67 s to react, and good tyres on dry asphalt give a friction coefficient of about 0.7. How far until it stops?
| Speed | 70 mph |
|---|---|
| Reaction time | 0.67 s |
| Tyre grip (friction coefficient) | 0.7 |
| Road gradient | 0 % |
| Thinking distance | 20.97 m |
| Braking distance | 71.3 m |
| Total stopping distance | 92.27 m |
| Time to stop | 5.227 s |
About 92 m, close to the 96 m (24 car lengths) the Highway Code gives for 70 mph. Change the grip to 0.4 for a wet road and the total rises to about 146 m; the thinking distance stays the same but the braking distance nearly doubles.
Frequently asked questions
- What is the stopping distance at 30 mph?
- 23 m according to the UK Highway Code: 9 m thinking distance and 14 m braking distance, about six car lengths, on a dry road with an alert driver. In the wet allow at least 46 m.
- What is the stopping distance at 70 mph?
- 96 m in the Highway Code (21 m thinking, 75 m braking), roughly 24 car lengths or the length of a football pitch. On a wet road it can easily exceed 150 m.
- How do you calculate braking distance?
- Braking distance = v² / (2μg). At 20 m/s (45 mph) on a dry road with μ = 0.7: 400 / (2 × 0.7 × 9.81) ≈ 29 m. Add the thinking distance, speed × reaction time, for the total.
- Why does doubling speed quadruple braking distance?
- The brakes must remove the car’s kinetic energy, ½mv², and the maximum braking force is fixed by tyre grip. Double v and the energy, and therefore the distance needed, is four times as large.
- What affects thinking distance?
- Only speed and reaction time. Tiredness, alcohol, drugs, distraction and phones lengthen reaction time. The road surface makes no difference to thinking distance, only to braking distance.
- How much longer is stopping distance on ice?
- Braking distance can be up to ten times longer. With a friction coefficient of 0.1 instead of 0.7, a car at 30 mph needs about 92 m to brake instead of 13 m.
Sources
- The Highway Code, rule 126: stopping distances, GOV.UK
- Braking distance, Wikipedia
- Friction coefficients, The Engineering ToolBox
- Mental chronometry (reaction time), Wikipedia
Related calculators
- Reaction Time Calculator: Catch a falling ruler, read off how far it dropped, and get your reaction time. The calculator also shows how far a car travels while you react.
- Friction Calculator: How hard do you have to push to get something sliding, and to keep it moving? Enter its mass and the friction coefficients for the two surfaces.
- Kinetic Energy Calculator: How much energy does a moving object carry? Enter its mass and speed to get its kinetic energy, its momentum and the height it would have to fall from to reach that speed.
- Acceleration Calculator: How hard is something speeding up or slowing down? Enter its starting speed, final speed and the time it took to get the acceleration and the distance covered.
Checked against the sources above. Last reviewed 2026-11-11. Calculators give estimates from standard formulas; see our disclaimer.
