Friction force calculator

How hard do you have to push to get something sliding, and to keep it moving? Enter its mass and the friction coefficients for the two surfaces.

Packed moving box 10–30 kg, wardrobe 60–100 kg, sledge with child 30–40 kg
Wood on wood 0.25–0.5, rubber on dry concrete about 1.0, steel on ice 0.03
Usually 20–40% lower than μs. Wood on wood about 0.2, rubber on dry concrete 0.8
For how far it slides before friction stops it
m/s²
Earth 9.81, Moon 1.62
Normal force (weight on a flat surface)–
Force to start it sliding–
Force to keep it sliding–
Deceleration when sliding freely–
Sliding distance before it stops–

See it for real: play Draw a Sled Track or play Park It or play Trick Shot Pool.

The formula

Friction is the force that resists two surfaces sliding over each other. For dry, solid surfaces it follows a simple rule, first written down by Guillaume Amontons in 1699 and refined by Charles-Augustin de Coulomb in 1781:

Fs,max = μs N   Fk = μk N   with   N = m g on a flat surface

Here N is the normal force, the push of the surface straight up against the object (equal to its weight on level ground), μs the coefficient of static friction and μk the coefficient of kinetic (sliding) friction. Both coefficients are plain numbers with no units, measured for each pair of materials. Static friction can take any value from zero up to μsN: push a heavy box gently and friction pushes back exactly as hard, so nothing moves. Only when your push exceeds μsN does the box break free, and then the smaller kinetic friction takes over.

Friction does not depend on contact area

A surprising part of Amontons’ law is that friction does not depend on how big the contact patch looks. A brick slides just as easily on its narrow side as on its broad face. The reason is that even polished surfaces touch only at microscopic bumps, and the true contact area is set by how hard they are pressed together, not by their size. Press twice as hard and twice as many bumps touch, giving twice the friction. Tyres are a partial exception, because rubber is soft and grips by deforming around the road texture.

Typical friction coefficients

SurfacesStatic μsKinetic μk
Rubber on dry concreteabout 1.0about 0.8
Steel on steel, dry0.740.57
Wood on concreteabout 0.6about 0.4
Wood on wood0.25–0.5about 0.2
Waxed ski on snow0.10.05
Steel on iceabout 0.03about 0.02
PTFE (Teflon) on PTFE0.040.04

Values vary with cleanliness, moisture and temperature, so treat any table as a starting point. Measure your own by tilting a board until an object starts to slide: the tangent of that angle is μs.

How far does it slide?

Once an object slides with nothing pushing it, kinetic friction is the only horizontal force, so it decelerates at a = μkg, whatever its mass. From v² = 2as it travels s = v²/(2μkg) before stopping. A curling stone (granite on pebbled ice, μk roughly 0.01) released at 2 m/s slides about 20 m, while a book pushed across a desk at the same speed stops in well under a metre.

Assumptions and limits

Everyday uses

Draw tracks in ordinary pencil snow, frictionless blue ice and other materials in Draw a Sled Track to see friction at work, try to stop on black ice in Park It, and watch the cloth slow a rolling ball in Trick Shot Pool.

Worked example

You need to drag a 40 kg wooden chest across a concrete garage floor. Wood on concrete has a static coefficient of about 0.6 and a kinetic coefficient of about 0.4.

Mass40 kg
Static friction coefficient (μs)0.6
Kinetic friction coefficient (μk)0.4
Sliding speed (optional)1 m/s
Gravity9.81 m/s²
Normal force (weight on a flat surface)392.4 N
Force to start it sliding235.4 N
Force to keep it sliding157 N
Deceleration when sliding freely3.924 m/s²
Sliding distance before it stops0.1274 m

You must pull with about 235 N (like lifting 24 kg) to break it free, but only about 157 N to keep it going. That drop is why heavy furniture “jumps” once it starts moving, and why it is easier to keep a slide going than to stop and restart.

Frequently asked questions

What is the formula for friction?
Friction force F = μN, where μ is the coefficient of friction and N the normal force (mg on flat ground). A 20 kg box with μ = 0.3 needs 0.3 × 20 × 9.81 ≈ 59 N to keep it sliding.
What is the difference between static and kinetic friction?
Static friction acts while surfaces are not moving relative to each other and can rise up to μsN. Kinetic friction acts once they slide and equals μkN. μk is usually 20–40% lower, which is why something is harder to start moving than to keep moving.
Can the coefficient of friction be greater than 1?
Yes. It just means friction can exceed the normal force. Racing tyres on warm tarmac reach 1.5 or more, and drag-racing tyres on a prepared track go higher still.
Does friction depend on surface area?
For dry solids, hardly at all: the true contact happens at microscopic bumps whose total area depends on the pressing force, not the apparent area. Soft materials such as tyres and adhesives are exceptions.
Does friction depend on speed?
Dry kinetic friction is roughly independent of speed over everyday ranges. Lubricated friction and air or water drag do increase with speed.
How do you measure the coefficient of friction?
Tilt a board with the object on it until it just starts to slide; μs = tan θ at that angle. Or pull the object with a spring balance: μ is the pulling force divided by the weight. A slide that starts at 22° has μs ≈ 0.40.

Sources

Related calculators

Play it