Hot-air balloon lift calculator
How much can a hot-air balloon carry? Enter the envelope volume and the temperatures inside and out, and the calculator uses the ideal gas law to find the lift.
See it for real: play Fly a Hot-Air Balloon.
The formula
A hot-air balloon floats for the same reason a cork does: it pushes aside a large volume of air, and the air pushes back up with a force equal to that air’s weight. The trick is that the air inside the envelope weighs less than the air outside, because it is hot. The lift is the difference:
lift (kg) = V × (ρoutside − ρinside) with ρ = P / (R T)
V is the envelope volume in m³ and each ρ is an air density in kg/m³. The densities come from the ideal gas law: P is the air pressure in pascals, T the absolute temperature in kelvin (°C + 273.15) and R = 287.05 J/(kg·K), the gas constant for dry air. The inside and outside pressures are almost exactly equal because the envelope is open at the bottom, so only the temperatures differ.
Multiply the lift in kilograms by g = 9.81 m/s² to get the upward force in newtons. The calculator then subtracts the empty balloon (envelope, basket, burners and full fuel cylinders) to show what is left for people.
Why heating air makes it lighter
Air molecules move faster when they are hot, so at the same pressure they spread out and fewer of them fit in each cubic metre. Density falls in proportion to absolute temperature: going from 15 °C (288 K) to 100 °C (373 K) divides the density by 373 / 288 = 1.30, a drop of 23%. A cubic metre of outside air at sea level weighs 1.225 kg; the same cubic metre of 100 °C air weighs 0.946 kg. Each cubic metre gives only 0.28 kg of lift, which is why balloons have to be so enormous. Helium and hydrogen balloons get about 1.0 to 1.1 kg per cubic metre and can be much smaller.
How conditions change the lift
For a 2,800 m³ envelope at sea-level pressure:
| Outside | Inside | Gross lift |
|---|---|---|
| 0 °C | 100 °C | 970 kg |
| 15 °C | 80 °C | 631 kg |
| 15 °C | 100 °C | 781 kg |
| 15 °C | 120 °C | 916 kg |
| 30 °C | 100 °C | 612 kg |
| 30 °C | 120 °C | 746 kg |
Cold days are good for lift, hot days bad. Height matters too: at 2,000 m the air pressure is about 79.5 kPa, and all the densities, and so the lift, are about a fifth lower than at sea level for the same temperatures. A balloon climbing on a fixed burner setting therefore levels off by itself when its lift has fallen to match its weight, which is how pilots hold an altitude.
From lift to flying
To rise, the gross lift must be a little more than the total mass of balloon, fuel and people; to sink, a little less. The difference only needs to be a few kilograms, so pilots control height with short burns and by opening a vent at the top. The envelope loses heat constantly through the fabric, so a burn is needed every 20 to 40 seconds to stay level. Steering is impossible: pilots change height to find winds blowing in the direction they want. You can try exactly this in Fly a Hot-Air Balloon, where the game computes the lift from the same equation every instant.
Assumptions
- The air inside is treated as one uniform temperature. In reality the top of the envelope is hotter than the mouth, by tens of degrees.
- Dry air is assumed. Humid air is very slightly less dense, which reduces lift by about 1% on a warm, muggy day.
- The fabric’s own volume and the small pressure difference across it are ignored; both effects are well under 1%.
- Empty masses vary a lot: propane weighs about 0.5 kg per litre, and three full 40 kg cylinders alone are 120 kg.
A little history
The first crewed flight, on 21 November 1783 over Paris, used a balloon built by the Montgolfier brothers from paper-lined cloth. It was heated by a fire of straw burning in a brazier under the open neck, while the two passengers, Pilâtre de Rozier and the Marquis d’Arlandes, stood on a gallery around the base feeding the flames. Straw smoke was thought at the time to contain a special lifting gas; we now know it was simply hot air, obeying the same equation as this calculator. Modern balloons replaced the straw with propane burners that put out several megawatts, and the paper with nylon or polyester fabric.
Worked example
The same 2,800 m³ balloon that carries five people on a 15 °C morning is launched on a 30 °C summer afternoon, with the envelope still at 100 °C and 350 kg of equipment and fuel. How much can it carry now?
| Envelope volume | 2800 m³ |
|---|---|
| Outside air temperature (°C) | 30 °C |
| Air temperature inside the envelope (°C) | 100 °C |
| Air pressure | 101.3 kPa |
| Empty balloon: envelope, basket, burner and fuel | 350 kg |
| Gross lift (total mass it can hold up) | 611.6 kg |
| Left for passengers | 261.6 kg |
| Adults at 80 kg each | 3 people |
| Outside air density | 1.164 kg/m³ |
| Inside air density | 0.946 kg/m³ |
The hot afternoon costs about 170 kg of lift, more than two passengers, because warm outside air is already lighter and the gap between inside and outside shrinks. That is one reason balloon flights take off around sunrise, when the air is coolest and calmest.
Frequently asked questions
- How much weight can a hot air balloon lift?
- A typical 2,800 m³ (100,000 ft³) balloon at 100 °C on a 15 °C day has a gross lift of about 780 kg. After about 350 kg of envelope, basket, burner and fuel, that leaves roughly 430 kg, about five adults.
- How hot is the air inside a hot air balloon?
- Usually between about 80 and 110 °C. Most envelope fabrics are rated to roughly 120 °C, and many balloons have a temperature sensor at the top that warns the pilot.
- How much lift does one cubic metre of hot air give?
- About 0.28 kg per m³ when heating air from 15 °C to 100 °C at sea level. Helium gives about 1.0 kg per m³ and hydrogen about 1.1 kg per m³, roughly four times as much.
- Why do hot air balloons fly in the morning?
- The air is coolest and calmest around sunrise. Cool air gives more lift, and before the sun heats the ground there are fewer gusts and thermals, which make take-off and landing dangerous.
- Do hot air balloons lose lift as they go higher?
- Yes. Air pressure falls about 11% per kilometre near the ground, so both air densities and the lift fall with it. The outside air also cools by about 6.5 °C per km, which partly makes up for this.
- How big is a hot air balloon?
- Common passenger balloons are 2,000 to 3,000 m³, roughly 17 to 20 m across and up to 25 m tall. Big commercial balloons carrying 20 or more passengers exceed 10,000 m³.
Sources
- Hot air balloon, Wikipedia
- Density of air, Wikipedia
- International Standard Atmosphere, Wikipedia
- Montgolfier brothers, Wikipedia
Related calculators
- Buoyancy Calculator: How hard does water push up on something you put in it? Enter the volume under the surface, the fluid and the object’s mass to get the buoyant force and what it weighs in the water.
- Ideal Gas Law Calculator: Enter how much gas you have, how hot it is and the space it fills, and get its pressure from PV = nRT, along with its mass, density and the number of molecules.
- Density Calculator: Weigh it, measure its volume, and find its density. The calculator also compares it with water so you know straight away whether it will float.
- Boiling Point at Altitude Calculator: Water boils at 100 °C only at sea level. Enter your altitude to see how much cooler it boils where you are, and the air pressure that causes it.
Checked against the sources above. Last reviewed 2026-11-11. Calculators give estimates from standard formulas; see our disclaimer.
