Boiling point at altitude calculator
Water boils at 100 °C only at sea level. Enter your altitude to see how much cooler it boils where you are, and the air pressure that causes it.
See it for real: play Fly a Hot-Air Balloon or play Pop the Popcorn.
Why altitude changes the boiling point
Water boils when its molecules escape as vapour fast enough to form bubbles inside the liquid. That happens when the vapour pressure of the water, which rises steeply with temperature, equals the pressure of the air pressing down on it. At sea level the air presses with 101.3 kPa, and water’s vapour pressure reaches that at 100 °C. Climb a mountain and there is less air above you, so the pressure is lower and the water reaches it at a lower temperature. The water boils just as fiercely, it is simply cooler.
The formulas
First, the air pressure at height h from the International Standard Atmosphere, valid up to 11 km:
P = P0 × (1 − 2.25577 × 10−5 × h)5.25588
Here P0 is the pressure at sea level (101,325 Pa on average) and h is in metres. The formula assumes the air cools by 6.5 °C per kilometre from 15 °C at sea level. Then the boiling point comes from the Antoine equation for water, an accurate fit to measured vapour pressures between 1 and 100 °C:
Tboil = 1730.63 / (8.07131 − log10 PmmHg) − 233.426
with the pressure in millimetres of mercury (1 mmHg = 133.32 Pa) and the answer in °C. At 760 mmHg it gives 100.0 °C, as it should.
The rule of thumb
Near sea level the boiling point drops by about 1 °C for every 300 m of climb (roughly 1 °F per 500 ft). Higher up it falls a little more slowly per metre, because the pressure falls more slowly in thinner air.
Boiling points around the world
| Place | Altitude | Pressure | Water boils at |
|---|---|---|---|
| Dead Sea shore | −430 m | 106.6 kPa | 101.4 °C |
| Sea level | 0 m | 101.3 kPa | 100.0 °C |
| Ben Nevis summit | 1,345 m | 86.2 kPa | 95.5 °C |
| Denver | 1,609 m | 83.4 kPa | 94.7 °C |
| Mexico City | 2,240 m | 77.2 kPa | 92.6 °C |
| La Paz | 3,640 m | 64.6 kPa | 87.9 °C |
| Everest Base Camp (south) | 5,364 m | 51.4 kPa | 82.1 °C |
| Summit of Everest | 8,849 m | 31.4 kPa | 70.3 °C |
Values are for the standard atmosphere. Real pressure on Everest’s summit is usually a little higher, about 33 to 34 kPa, because the air over the tropics is warmer than the standard model assumes, so water there boils at about 71 to 72 °C.
Weather matters too
The second input lets you use today’s sea-level pressure from a forecast. A deep Atlantic low at 960 hPa lowers the boiling point at sea level to about 98.5 °C; a strong high at 1,040 hPa raises it to about 100.7 °C. The effect is small for cooking but easy to measure with a good thermometer.
What it means in the kitchen
- Slower cooking: chemical reactions in food slow down as the temperature drops. Hard-boiling an egg in La Paz, where water boils at 88 °C, takes several minutes longer than at sea level.
- Tea: black tea brewed with water at 85 to 90 °C is weaker, a well-known complaint at high-altitude trekking lodges.
- Pressure cookers: they seal in steam at about 1 atmosphere above outside pressure, raising the boiling point to around 120 °C at sea level and cutting cooking times by two-thirds.
- Baking: water and gases in dough evaporate and expand sooner, so high-altitude recipes use a little less raising agent and a slightly hotter oven.
Assumptions
The calculator is for pure water. Salt raises the boiling point only slightly: a tablespoon in a big pan of pasta water adds well under 0.5 °C. The standard atmosphere is an average, and real pressure at a given height changes with the weather by a few per cent. You can feel air thinning with height in Fly a Hot-Air Balloon, and watch the opposite effect, water held under pressure far above 100 °C until it bursts out, in Pop the Popcorn.
Worked example
Denver, Colorado, is the “Mile High City”, 1,609 m (5,280 ft) above sea level. At what temperature does water boil there on an average day?
| Altitude above sea level | 1609 m |
|---|---|
| Sea-level pressure today | 1013 hPa (mbar) |
| Boiling point | 94.66 °C |
| Boiling point in Fahrenheit | 202.4 °F |
| Air pressure at that altitude | 83.43 kPa |
| Lower than at sea level by | 5.334 °C |
About 94.7 °C (202 °F), more than 5 °C cooler than at sea level. Food in boiling water cooks more slowly, which is why many US recipes and packet instructions include high-altitude adjustments above about 3,000 ft (900 m).
Frequently asked questions
- At what temperature does water boil at altitude?
- About 1 °C lower for every 300 m. At 1,000 m water boils at about 96.7 °C, at 2,000 m about 93.4 °C, at 3,000 m about 90 °C and on the summit of Everest about 70 to 72 °C.
- Why does water boil at a lower temperature at high altitude?
- There is less air pressing down on the water. Water boils when its vapour pressure equals the surrounding air pressure, and at lower pressure it reaches that point at a lower temperature.
- What is the boiling point of water in Denver?
- About 94.7 °C (202.4 °F) at 1,609 m on an average day, compared with 100 °C (212 °F) at sea level.
- Does food take longer to cook at high altitude?
- Yes, when it is cooked in boiling water or steam, because the water is cooler. Pasta, rice, beans and boiled eggs all need extra time; above about 3,000 m many cooks use a pressure cooker.
- What temperature does water boil at on Mount Everest?
- About 70 to 72 °C (158 to 161 °F). The summit air pressure is roughly a third of sea-level pressure, about 31 to 34 kPa depending on the weather and season.
- Does adding salt make water boil faster?
- No. Salt raises the boiling point slightly (about 0.5 °C for 30 g per litre, which is nearly as salty as seawater; a tablespoon in 4 litres adds under 0.1 °C), so if anything it boils very slightly later. It adds flavour, not speed.
Sources
- Boiling point, Wikipedia
- Antoine equation, Wikipedia
- Barometric formula, Wikipedia
- International Standard Atmosphere, Wikipedia
Related calculators
- Pressure Calculator: Pressure is force spread over an area. Enter a force (or a weight) and the area it presses on, and get the pressure in every common unit.
- Ideal Gas Law Calculator: Enter how much gas you have, how hot it is and the space it fills, and get its pressure from PV = nRT, along with its mass, density and the number of molecules.
- Specific Heat Calculator: How much energy does it take to heat something up? Enter the mass, the material’s specific heat and the temperature rise, and see the energy and how long a heater would take.
Checked against the sources above. Last reviewed 2026-11-11. Calculators give estimates from standard formulas; see our disclaimer.

