Buoyancy calculator

How hard does water push up on something you put in it? Enter the volume under the surface, the fluid and the object’s mass to get the buoyant force and what it weighs in the water.

For a fully submerged object this is its whole volume. 1 L = 1,000 cm³
Fresh water 1000, sea water 1025, Dead Sea about 1240, air 1.2
m/s²
Earth 9.81
Buoyant force (upthrust)–
Mass of fluid displaced–
Apparent weight in the fluid–
Average density of the object (if fully submerged)–

See it for real: play Fly a Hot-Air Balloon or play Sandpit.

Archimedes’ principle

Anything in a fluid, whether water, oil or air, is pushed upwards by a force equal to the weight of the fluid it pushes out of the way. That is Archimedes’ principle, and the force is called the buoyant force or upthrust:

Fb = ρfluid × Vsub × g  and  apparent weight = m g − Fb

Here ρfluid is the density of the fluid in kg/m³, Vsub is the volume of the object below the surface in m³, and g is the acceleration of gravity, 9.81 m/s² on Earth. The answer is a force in newtons. A handy shortcut: in fresh water, every litre submerged gives about 9.8 N of lift, the same as the weight of a 1 kg bag of sugar.

Notice what is missing: the object’s own material. A litre of lead and a litre of polystyrene feel exactly the same upthrust when fully under water. What differs is their weight. Lead weighs 11.3 kg per litre, far more than the 1 kg of water it displaces, so it sinks; polystyrene weighs about 0.03 kg per litre, so it shoots to the surface.

Why the fluid pushes up

Pressure in a fluid grows with depth, by about 1 atmosphere every 10 m in water. The bottom of a submerged object is deeper than its top, so the water pushes harder on the bottom than on the top. Add up all those pushes around the surface and what is left over is an upward force, and the maths works out to be exactly the weight of the fluid that would fill the same space. That is why the shape of the object does not matter, only the volume under the surface.

Floating, sinking and hovering

Compare the object’s weight with the largest upthrust it can get (when it is fully submerged):

Typical numbers

SituationVolume displacedUpthrust
Fully submerged 1 L bottle, fresh water1 L9.8 N
Adult swimmer, full lungs, sea waterabout 72 Labout 720 N
Bath duck floatingabout 20 mL (its 20 g)about 0.2 N
Hot-air balloon envelope in air2,800 m³about 33,600 N (3.4 t of air)
Large container shipabout 200,000 m³about 2 billion N

The same rule works in air: a 2,800 m³ balloon displaces about 3.4 tonnes of air at sea level. It only gets net lift because the hot air inside weighs less than the cool air it pushes aside, which you can try in Fly a Hot-Air Balloon. Oil floating on water in Sandpit is buoyancy too.

Why steel ships float

Steel is nearly eight times as dense as water, but a ship is a thin steel shell around a huge volume of air. Its hull sinks until the water it pushes aside weighs as much as the whole ship and cargo. Load more and it sits lower; the Plimsoll line painted on the hull marks how low it may safely go, with a separate, higher mark for fresh water: fresh water is about 2.5% less dense, so the ship must displace about 2.5% more volume and sits deeper.

Assumptions

Worked example

A 70 kg swimmer with a body volume of about 68 litres (lungs half full) is completely under the sea, where water is 1,025 kg/m³. How much does the sea push up, and what do they weigh in the water?

Volume under the surface68 L
Fluid density1025 kg/m³
Mass of the object70 kg
Gravity9.81 m/s²
Buoyant force (upthrust)683.8 N
Mass of fluid displaced69.7 kg
Apparent weight in the fluid2.943 N
Average density of the object (if fully submerged)1029 kg/m³

The sea holds up all but about 3 N of a 687 N body, so in water the swimmer weighs as much as a 300 g bag of sugar does on land. Take a deep breath (about 3 more litres of volume) and the upthrust rises by 30 N, enough to float; breathe out fully and most people slowly sink.

Frequently asked questions

What is the formula for buoyant force?
F = ρ × V × g: fluid density times the volume submerged times gravity. A 10 L object fully under fresh water feels 1,000 × 0.010 × 9.81 = 98 N of upthrust.
Why do some things float and others sink?
If an object’s average density is less than the fluid’s, it floats; if greater, it sinks. A ship floats because its hull is mostly air, giving it an average density well below 1,000 kg/m³.
Is it easier to float in salt water?
Yes. Sea water (about 1,025 kg/m³) gives 2.5% more lift than fresh water, and the Dead Sea (about 1,240 kg/m³) gives 24% more, enough that people float with their shoulders out of the water.
How much does an object weigh underwater?
Its apparent weight is its real weight minus the buoyant force. A 2 kg stone with a volume of 0.8 L weighs 19.6 N in air but only 19.6 − 7.8 = 11.8 N under fresh water.
Does depth change the buoyant force?
Hardly, because water barely compresses. Upthrust only changes with depth if the object itself squashes, like a diver’s wetsuit or lungs, which is why divers become less buoyant as they descend.
What percentage of an iceberg is under water?
Ice is about 917 kg/m³ and sea water about 1,025 kg/m³, so roughly 917 / 1,025 ≈ 89% of an iceberg is below the surface.

Sources

Related calculators

Play it