Drag force calculator
How hard does the air push back? Enter the speed, the shape’s drag coefficient and its frontal area to get the drag force and the power needed to keep going.
See it for real: play Paper Toss or play Throw a Paper Plane or play Egg Drop.
The formula
When an object moves through air or water, it has to shove the fluid out of the way. The fluid pushes back with a drag force given by the drag equation:
Fd = ½ ρ v² Cd A and the power to overcome it P = Fd v = ½ ρ v³ Cd A
Here ρ (rho) is the density of the fluid in kg/m³, v the speed relative to the fluid in m/s, Cd the drag coefficient (a number with no units that captures how streamlined the shape is) and A the frontal area in m², the area of the shadow the object would cast if lit from straight ahead. The group ½ρv² is called the dynamic pressure: it is the pressure you would feel if you brought the moving air to a complete stop against your palm.
Why speed squared, and power cubed
Every second, a moving object pushes aside a column of air whose mass is proportional to its speed, and it has to give that air a velocity also proportional to its speed. Mass times speed change gives force proportional to v². Power is force times speed, so it goes up with v³. That cube is brutal: cycling at 40 km/h instead of 30 km/h takes 2.4 times the power against the air. Even per mile, the drag on a car at 70 mph is 56% higher than at 56 mph, which is a big part of why fuel economy falls off so sharply on the motorway.
Typical drag coefficients
| Shape | Cd |
|---|---|
| Streamlined teardrop | 0.04 |
| Modern saloon car | 0.23–0.30 |
| Typical SUV or van | 0.35–0.45 |
| Smooth sphere (ball) | 0.47 |
| Long cylinder side-on | 0.82 |
| Upright cyclist | about 0.9 |
| Cube | 1.05 |
| Flat plate facing the flow | about 1.2 |
| Open round parachute | 1.3–1.5 |
For vehicles, what matters is the product CdA, sometimes called the drag area. A small, boxy city car and a large, sleek saloon can have similar values.
Air, water and altitude
Drag is proportional to density, and water is about 800 times denser than air. That is why wading is so much harder than walking, and why a swimmer at only 2 m/s meets a drag force of roughly 50–100 N, as much as a cyclist faces at 50 km/h. Going the other way, at 2,000 m altitude the air is about 18% thinner than at sea level, which is why cycling hour records are often attempted at high-altitude velodromes such as Mexico City and Aguascalientes, and why airliners cruise at 10–12 km.
Assumptions and limits
- Quadratic drag regime. The equation with constant Cd works for most everyday objects (Reynolds number above about 1,000). For tiny or very slow things, such as dust, pollen or a bead sinking in honey, drag is proportional to v instead (Stokes’ law).
- Cd changes with speed for some shapes. A smooth sphere’s Cd drops suddenly from about 0.47 to around 0.1–0.2 when the boundary layer turns turbulent; golf-ball dimples make that happen at lower speeds, roughly halving drag for a well-struck drive.
- No wind and no other resistance. Use the speed relative to the air, and remember that rolling resistance and drivetrain losses add to the total for vehicles.
- Below the speed of sound. Near Mach 1 shock waves add a large extra wave drag.
Everyday uses
- Cycling and running: how much power drafting, tucking or a headwind costs or saves.
- Cars and fuel: above about 80 km/h aerodynamic drag is the largest force a car must overcome.
- Parachutes and egg drops: sizing a canopy to give a gentle landing speed.
- Sport balls: understanding why a table-tennis ball slows so quickly and a shot put barely notices the air.
Feel drag bend a flight path in Paper Toss, where a desk fan blows the light paper ball off course, glide it with lift and drag in Throw a Paper Plane, and choose a parachute that turns drag into a soft landing in Egg Drop.
Worked example
A commuter rides upright at 36 km/h (10 m/s) on a still day. An upright rider and bike have a drag coefficient of about 0.9 and a frontal area of about 0.45 m².
| Speed through the air | 10 m/s |
|---|---|
| Drag coefficient (Cd) | 0.9 |
| Frontal area | 0.45 m² |
| Fluid density | 1.225 kg/m³ |
| Drag force | 24.81 N |
| Power to overcome drag | 248.1 W |
| Dynamic pressure | 61.25 Pa |
Drag is about 25 N and pushing through it takes about 250 W, a hard but sustainable effort for a fit amateur. Tucking low on drop handlebars can cut CdA by a quarter or more; at the same 250 W the rider then goes about 10% faster, because power rises with the cube of speed.
Frequently asked questions
- What is the formula for drag force?
- F = ½ρv²CdA: half the fluid density times speed squared times drag coefficient times frontal area. A car with Cd 0.3 and 2.2 m² at 31 m/s (70 mph) in sea-level air feels about 0.5 × 1.225 × 31.3² × 0.3 × 2.2 ≈ 400 N.
- How does drag change with speed?
- Drag force rises with the square of speed and the power needed to overcome it with the cube. Doubling speed means four times the drag and eight times the power.
- What is a good drag coefficient for a car?
- Most modern cars are between 0.25 and 0.35. Some of the most aerodynamic production cars reach about 0.2; boxy SUVs and vans are often 0.35–0.45, and an open lorry can exceed 0.6.
- Why do golf balls have dimples?
- Dimples trip the air next to the ball into turbulence, which clings to the back of the ball longer and leaves a narrower wake. That roughly halves the drag at driving speeds, so a dimpled ball flies about twice as far as a smooth one.
- How much power does a cyclist need to overcome air resistance?
- At 30 km/h an upright rider (CdA about 0.4 m²) needs roughly 140 W just for drag; at 40 km/h about 340 W. A racing cyclist tucked low with CdA near 0.25 m² needs about 210 W for 40 km/h.
- What is the difference between drag and air resistance?
- Air resistance is drag in air. Drag is the general name for the force any fluid, air or water, exerts against an object moving through it.
Sources
- Drag equation, Wikipedia
- Drag coefficient, Wikipedia
- The drag equation, NASA Glenn Research Center
- Drag coefficients of common shapes, The Engineering ToolBox
Related calculators
- Terminal Velocity Calculator: How fast can a falling object go before air resistance stops it speeding up? Enter its mass, shape and size to find its terminal velocity.
- Projectile Motion Calculator: How far does a ball fly, how high does it go and how long is it in the air? Enter a launch speed, an angle and a starting height.
- Work and Power Calculator: How much work does a force do, and how much power does that take? Enter the force, the distance moved, the angle between them and the time taken.
- Density Calculator: Weigh it, measure its volume, and find its density. The calculator also compares it with water so you know straight away whether it will float.
Checked against the sources above. Last reviewed 2026-11-11. Calculators give estimates from standard formulas; see our disclaimer.


