Work and power calculator
How much work does a force do, and how much power does that take? Enter the force, the distance moved, the angle between them and the time taken.
See it for real: play Swing Across or play Draw a Sled Track or play Build a Trebuchet.
The formulas
In physics, work is energy passed on by a force when the thing it pushes actually moves. Power is how fast that energy is passed on.
W = F d cos θ and P = W / t
F is the force in newtons, d the distance moved in metres, θ the angle between the force and the direction of motion, and t the time in seconds. Work comes out in joules (1 J = 1 N × 1 m) and power in watts (1 W = 1 J every second). When the force pushes straight along the motion, cos 0° = 1 and the formula is simply force times distance.
Why the angle matters
Only the part of a force that points along the motion does work. Pull a suitcase by its handle at 45° and cos 45° = 0.71, so 71% of your pull moves it forward; the rest just lifts the front wheels. At 90° the force does no work at all. That is why carrying a heavy bag along a level corridor does no work in the physics sense (your arms push up, the bag moves sideways), even though your muscles tire: they use energy just holding the load, but none of it goes into the bag. Above 90° the cosine is negative and so is the work. Friction, air drag and brakes always do negative work: they take kinetic energy away and turn it into heat.
Work and energy
The work–energy theorem says the total work done on an object equals the change in its kinetic energy. Lift a 10 kg box 1.5 m onto a shelf and you do 147 J of work against gravity, all stored as potential energy. Push a 1,000 kg car from rest with a net 300 N over 20 m and the 6,000 J you supply becomes ½mv², so it reaches 3.5 m/s. Power then tells you how quickly: the same 6,000 J delivered in 10 s is 600 W, in one minute only 100 W.
Assumptions and limits
- The force and the angle are taken as constant over the whole distance. If the force changes, for example a spring that pulls harder the more it stretches, work is the area under the force–distance graph instead.
- Power here is the average over the time. Instantaneous power is F v cos θ, force times speed, which is why an engine needs most power at high speed.
- The result is the mechanical work delivered, not the energy your body or a motor uses. Human muscles are about 25% efficient, an electric motor 85 to 95%, a petrol engine about 30%.
Typical power
| Source | Power |
|---|---|
| A person walking up stairs slowly | 100 to 200 W |
| Sprinting up a flight of stairs (70 kg, 3 m in 3 s) | about 690 W |
| Amateur cyclist, sustained for an hour | 150 to 250 W |
| Professional cyclist, sustained for an hour | about 400 W |
| One horsepower (James Watt’s working horse) | 745.7 W |
| Kettle | 2,000 to 3,000 W |
| Small family car at full throttle | about 75,000 W (100 hp) |
Everyday uses
- Stair test: time yourself running up a flight of stairs, multiply your mass by 9.81 and the height, and divide by the time. Most teenagers manage 400 to 800 W, which is roughly one horsepower for a few seconds.
- Electricity bills: a 2 kW heater on for 3 hours uses 6 kWh, because energy is power times time. One kWh is 3.6 million joules.
- Ramps and pulleys: a ramp lets you push with less force over a longer distance. The work, force times distance, stays about the same, apart from friction.
Feel work and power in the games: in Swing Across pulling the rope in at the bottom of each swing is real work that feeds the swing, in Draw a Sled Track friction does negative work on the sled, and in Build a Trebuchet the falling counterweight does work on the arm.
Worked example
You pull a sledge 50 m across flat snow with a rope, pulling with 60 N at 30° above the ground. It takes 40 seconds. How much work do you do, and at what power?
| Force | 60 N |
|---|---|
| Distance moved | 50 m |
| Angle between force and motion | 30 ° |
| Time taken | 40 s |
| Work done | 2598 J |
| Average power | 64.95 W |
| Force along the motion | 51.96 N |
Only 52 N of your pull points along the ground; the rest lifts the front of the sledge a little and does no work. About 65 W is a comfortable walking effort, roughly the same as climbing stairs slowly.
Frequently asked questions
- What is the formula for work done?
- Work W = F × d × cos θ, where F is the force, d the distance moved and θ the angle between them. Pushing a trolley with 50 N for 20 m straight ahead does 50 × 20 = 1,000 J of work.
- What is the difference between work and power?
- Work is the energy transferred (in joules); power is how quickly it is transferred (in watts, joules per second). Lifting 100 kg by 1 m is about 981 J of work whether it takes 1 second (981 W) or 10 seconds (98 W).
- How many watts is one horsepower?
- One mechanical (imperial) horsepower is 745.7 W. The metric horsepower (PS) is slightly less, 735.5 W. A 100 hp car engine delivers about 75 kW.
- Is work done if you hold something still?
- No. If nothing moves, d = 0 and no work is done on the object, even though your muscles burn energy to stay tense. The same goes for carrying a bag along level ground: the upward force is at 90° to the motion.
- Can work be negative?
- Yes. When a force acts against the motion (θ greater than 90°), it does negative work and removes energy from the object. Brakes on a 1,200 kg car stopping from 13.4 m/s (30 mph) do about −108 kJ of work.
- How do you calculate power from force and speed?
- P = F × v. A cyclist pushing against 25 N of drag and rolling resistance at 10 m/s (36 km/h) needs 250 W at the wheels.
Sources
- Work (physics), Wikipedia
- Power (physics), Wikipedia
- Work, energy and power, HyperPhysics
- Horsepower, Wikipedia
Related calculators
- Potential Energy Calculator: How much energy does it take to lift something, and how much does it give back when it falls? Enter a mass and a height to get the gravitational potential energy.
- Kinetic Energy Calculator: How much energy does a moving object carry? Enter its mass and speed to get its kinetic energy, its momentum and the height it would have to fall from to reach that speed.
- Force Calculator: How much force does it take to speed something up? Enter a mass and an acceleration to get the force in newtons, using Newton’s second law.
- Friction Calculator: How hard do you have to push to get something sliding, and to keep it moving? Enter its mass and the friction coefficients for the two surfaces.
Checked against the sources above. Last reviewed 2026-11-11. Calculators give estimates from standard formulas; see our disclaimer.


