Throw a Paper Plane: lesson plan
Pupils fold five real paper plane designs in the game, throw them out of a virtual classroom window and find out why gentle throws often fly further than hard ones. They then fold real planes and run a fair test, changing one thing at a time, just as aircraft engineers do.
- Ages
- 9–14 (grades 4–9)
- Time
- 60 minutes
- Subject
- Physics and design: lift, drag, weight and fair testing
- You need
- Devices with a browser (one per pair), A4 80 gsm paper, tape measures, paper clips, a clear space such as a hall or corridor
Open Throw a Paper Plane Jump to the quiz
Learning objectives
By the end of the lesson, students can:
- Name the four forces on a gliding plane (lift, weight, drag and, at launch, thrust from the throw) and show them on a diagram.
- Explain that lift grows with the square of speed and with wing area, and that too steep an angle of attack causes a stall.
- Explain why long, thin wings (high aspect ratio) glide flatter than short, wide ones.
- Plan and carry out a fair test on real paper planes, changing one variable and measuring distance.
Key vocabulary
- Lift
- The upward force made by air flowing over a wing. Lift = ½ × air density × speed² × wing area × lift coefficient.
- Drag
- Air resistance acting against the plane’s motion. It includes induced drag, the “price” of making lift.
- Weight
- The pull of gravity. An A4 sheet of 80 gsm paper has a mass of about 5 g, so it weighs about 0.049 N.
- Angle of attack
- The angle between the wing and the oncoming air. More angle gives more lift, up to a limit.
- Stall
- When the angle of attack is too steep (around 15°), air peels off the top of the wing and lift collapses.
- Aspect ratio
- Wingspan squared divided by wing area. Long, thin wings have a high aspect ratio and less induced drag.
- Glide ratio
- How far a glider travels forward for each metre it sinks. Simple paper planes rarely beat about 7.5 to 1.
Background for the teacher
A sheet of A4 is one sixteenth of a square metre, so at 80 gsm it has a mass of 5 g and a weight of about 0.049 N. Lift = ½ρv²SCL, with air density ρ = 1.225 kg/m³. For a wing area of about 0.02 m² flying at 6 m/s, ½ × 1.225 × 36 × 0.02 ≈ 0.44 N per unit of lift coefficient, so a lift coefficient of only about 0.11 is enough to support the plane. Double the speed and lift quadruples, which is why hard throws make planes climb, slow, dive and climb again (a phugoid) or loop. Push the angle of attack past about 15° and the wing stalls.
Drag has a fixed part (friction and shape) and induced drag, whose coefficient is CL² ÷ (π × aspect ratio × e), so longer, thinner wings waste less energy making lift. In the game every plane is the same 5 g sheet: the Dart has stubby swept wings with an aspect ratio near 1, the long-wing glider nearer 3. The flight is calculated 240 times a second in two dimensions, with stall, pitch stability, ground effect, wind and thermals. Throws range from 3 to 16 m/s; the tail trim slider bends the trailing edge up or down. The record for distance is 98.43 m, by Liu Liwen in Shanghai on 28 December 2025.
Warm-up (5 minutes)
- Ask: “If you throw a paper plane harder, will it always go further?” Take a vote and record it to revisit after the game.
- Hand out a sheet of A4 and ask pupils to estimate its mass. Reveal it is about 5 g and show how: 1 m² of 80 gsm paper is 80 g, and A4 is 1/16 of a square metre.
Activity with the game
- Pairs open Throw a Paper Plane, choose the Dart and watch it fold crease by crease. Press, drag back like a slingshot and release. Throw three times: gentle, medium and hard, keeping the angle the same. Record the distance on the yellow tape measure each time.
- Repeat the same three throws with the wide Glider. Which design likes hard throws, and which flies further when thrown gently? Record the results in a table.
- Use the tail trim slider. Bend the tail up by a few millimetres and throw; then down. Describe what happens (climb and stall, or dive) and find the best trim for the Glider.
- As designs unlock (Nakamura Lock, the long-wing Suzanne-style glider, the Stunt plane), note each one’s wingspan and wing shape. Rank them by how long, thin their wings look and compare with their best gentle-throw distance.
- Real fair test in the hall (20 minutes): every pair folds the same design from A4. Choose one variable to change (adding a paper clip to the nose, bending the tail up 3 mm, or wing length). Throw each version five times, gently, from the same line and measure the distance. Calculate the mean.
- Class round-up: share results and decide what made a difference. Revisit the warm-up vote: did harder throws always go further?
Discussion questions
- Why did the gliders fly further with gentle throws than hard ones?
Show a model answer
Lift grows with the square of speed. A hard throw makes so much lift that the plane climbs steeply, slows, stalls or loops, wasting energy. A gentle throw lets it settle into a steady glide.- Why do long, thin wings glide flatter?
Show a model answer
Making lift always costs some induced drag, and that drag is smaller for wings with a high aspect ratio. Less drag means the plane loses less height for each metre it travels.- What does bending the tail up do?
Show a model answer
It pushes the tail down and the nose up, so the plane flies at a higher angle of attack and more slowly. A little helps a nose-diving plane; too much makes it stall or loop.- Why did we throw each plane five times and take the mean?
Show a model answer
No two throws are identical, so single results scatter (random error). Averaging several throws gives a fairer value to compare designs.- How do thermals in the game help, and are they realistic?
Show a model answer
Sun-warmed ground, like roads and car parks, heats the air above it, which rises. Real glider pilots circle in thermals to climb. The game’s plane cannot turn, so its thermals pull it in a little to stand in for circling.
Common misconceptions
- Throwing harder always makes a paper plane fly further.
- Too much speed makes too much lift, so the plane climbs, slows and stalls or loops. Most gliders fly furthest from a steady, gentle throw.
- A plane glides because the air is “holding it up” for free.
- A glider is always sinking through the air. It trades height for forward motion, and gravity provides the energy.
- Heavier planes always fall faster.
- A small nose weight often improves a paper plane by moving the balance point forward, making it more stable. What matters is the balance between weight, lift and the position of the centre of gravity.
Quick quiz
What is the weight of a 5 g paper plane (g = 9.81 N/kg)?
- 0.0049 N
- 0.049 N
- 0.49 N
- 5 N
Answer
B. W = mg = 0.005 kg × 9.81 N/kg ≈ 0.049 N.
If a plane flies twice as fast, its lift becomes about…
- The same
- Twice as big
- Four times as big
- Half as big
Answer
C. Lift depends on speed squared: 2² = 4.
What causes a stall?
- Flying too slowly with the nose too high, so the angle of attack is too steep
- Too much paper
- Flying through a thermal
- Throwing too gently with the nose level
Answer
A. Past about 15° angle of attack the airflow separates from the top of the wing and lift collapses.
Which wing has the highest aspect ratio?
- Short and wide
- Long and thin
- Triangular dart
- Square
Answer
B. Aspect ratio = span² ÷ area. Long, thin wings have a big span for their area.
A paper plane with a glide ratio of 6 to 1 is launched 1.5 m above the floor in still air. About how far can it glide?
- 1.5 m
- 6 m
- 9 m
- 15 m
Answer
C. Distance = 6 × 1.5 m = 9 m.
In a fair test of nose weight, what should you keep the same?
- Only the paper
- Nothing
- Only the person throwing
- Everything except the nose weight
Answer
D. Change one variable only, so any difference must be caused by it.
Going further
- Hold a class competition with two categories: longest distance and longest time aloft. Compare with the records: 98.43 m (Shanghai, 2025) and 31.2 s (Kunshan, 2026).
- Use the drag force calculator to estimate the drag on a sheet of paper falling flat, then screwed into a ball. Drop both and compare.
- Research Ludwig Prandtl and the history of wing theory, or how real gliders find thermals, and present one page.
Calculators for this lesson
Curriculum links
- England National Curriculum, KS2 Year 5 Science, Forces: identify the effects of air resistance, water resistance and friction, that act between moving surfaces.
- NGSS MS-ETS1-3: analyse data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each.
- NGSS MS-ETS1-4: develop a model to generate data for iterative testing and modification of a proposed object, tool, or process such that an optimal design can be achieved.
- NGSS 3-5-ETS1-3: plan and carry out fair tests in which variables are controlled and failure points are considered to identify aspects of a model or prototype that can be improved.
The science in this plan matches the notes and sources under Throw a Paper Plane. Free to use and adapt for teaching. Ideas or corrections: hello@notebookfun.com.