Trick Shot Pool: lesson plan
Students play ten trick-shot pool tables, then use stun shots, cut shots and screw-back shots to explain conservation of momentum, elastic collisions between equal masses, and how friction with the cloth turns sliding into rolling.
- Ages
- 13–16 (grades 8–10)
- Time
- 50 minutes
- Subject
- Physics: momentum, collisions and friction
- You need
- Devices with a browser (one per pair), two or three marbles or snooker balls, a smooth table or tray, a protractor, optional Newton’s cradle
Open Trick Shot Pool Jump to the quiz
Learning objectives
By the end of the lesson, students can:
- State the principle of conservation of momentum and use p = mv to explain why a white ball stops dead after a full-on stun shot.
- Describe an elastic collision and explain why two equal-mass balls separate at 90° after a glancing hit with no spin.
- Explain how friction with the cloth changes a sliding ball into a rolling one, and why spin is not passed on in a collision.
- Calculate momentum and kinetic energy for a pool ball and the energy lost when a cushion returns 70% of its speed.
Key vocabulary
- Momentum
- Mass × velocity (p = mv), in kg m/s. In a collision, the total momentum before equals the total after, if no outside force acts.
- Elastic collision
- A collision in which kinetic energy is conserved as well as momentum. Pool balls are very nearly elastic.
- Stun shot
- A centre-ball hit that reaches the object ball while still sliding, so the white stops dead on impact.
- Cut shot
- Hitting the object ball off-centre so it moves off at an angle.
- Friction
- The force between the ball and the cloth that opposes sliding. It slows a sliding ball and makes it start to roll.
- Top spin and back spin
- Spin forwards or backwards made by hitting the white above or below centre. It changes what the white does after a collision.
Background for the teacher
A pool ball has a mass of about 170 g and a diameter of 57 mm. In Trick Shot Pool, you drag back from the white and release; the further you pull, the harder the shot. A dotted line, a ghost ball and a yellow line preview where the white and the first ball will go. Before shooting you choose centre, top spin or back spin.
Struck in the centre, a ball first slides without turning. Friction with the cloth (coefficient about 0.2) slows the sliding and spins the ball up until it rolls, which always happens at 5/7 of the starting speed. For a 2 m/s shot that takes about 2v ÷ 7μg ≈ 0.29 s and about 0.5 m. Rolling balls slow far more gently (rolling resistance about 0.01). Ball collisions are almost perfectly elastic, and the balls have equal mass, so a sliding white that hits full on gives the object ball all of its momentum and stops: 0.17 kg × 2 m/s = 0.34 kg m/s before, and the same after, carried by the other ball. Hit off-centre, the two leave at 90° (the 90-degree rule). Spin is not passed on, so top spin makes the white follow through, and back spin pulls it back. Cushions return about 70% of the speed, so about half (0.7² = 0.49) of the kinetic energy.
Warm-up (5 minutes)
- Roll one marble into a stationary identical marble, dead centre. Ask: “What happened to the first marble? Where did its motion go?” A Newton’s cradle shows the same thing.
- Ask: “A bowling ball hits a skittle. A skittle hits a bowling ball at the same speed. Which collision is more dramatic, and why?”
Activity with the game
- Pairs open Trick Shot Pool and play Straight in and The cut. Press on the table, drag back from the white and let go. Use the ghost ball to aim. Note where the white goes after each pot.
- Play Stop dead with centre selected. Pairs describe what the white does on impact and explain it using momentum and equal masses.
- Back on The cut, play three cut shots at different angles. Each time, sketch the paths of the white and the object ball after impact and measure the angle between them with a protractor on screen or on the sketch. (Close to 90° when there is no spin.)
- Play Draw it back with back spin, then try the same shot with top spin and with centre. Pairs record what the white does after impact in each case and explain why spin makes the difference.
- Play Off the cushion. Pairs note how much slower a ball is after it bounces, and calculate the kinetic energy kept if the cushion returns 70% of the speed.
- Calculation sheet: for a 0.17 kg ball at 2 m/s, calculate its momentum and kinetic energy. After a full-on stun shot, what are the momentum and kinetic energy of each ball?
Discussion questions
- Why does the white stop dead in a stun shot?
Show a model answer
Momentum is conserved, and in an elastic collision kinetic energy is too. With equal masses, the only way to satisfy both is for the white to hand all its velocity to the object ball and stop. This only works if the white is sliding without spin when it hits.- Why do the balls separate at 90° after a cut shot?
Show a model answer
The collision force acts along the line joining the centres, so the object ball moves off along that line. The white keeps only the part of its velocity at right angles to that line. With equal masses and an elastic collision, the two velocities end up perpendicular.- How does back spin make the white come back towards you?
Show a model answer
The collision takes away the white’s forward motion, but not its backward spin, because the contact between the balls is almost frictionless. The cloth then grips the spinning ball and friction drives it backwards.- Why does a ball always end up rolling at 5/7 of its starting speed after a centre hit?
Show a model answer
Friction from the cloth slows the sliding and at the same time makes the ball spin. It stops slipping when the rolling speed matches the forward speed. For a solid sphere, the way its mass is spread means that happens at 5/7 of the starting speed.- Where does the kinetic energy go when a ball slows down on the cloth?
Show a model answer
Friction and rolling resistance transfer it to heating the cloth and ball, and a little to sound. In the cushion, energy goes into deforming the rubber and is dissipated as heat.
Common misconceptions
- In any collision, the moving ball always keeps going a bit.
- With equal masses, a full-on elastic hit with no spin transfers all of the momentum, so the moving ball stops completely.
- Momentum and kinetic energy are the same thing.
- Momentum (mv) is always conserved in a collision with no outside force. Kinetic energy (½mv²) is conserved only in elastic collisions; in most real collisions some becomes heat and sound.
Quick quiz
What is the momentum of a 0.17 kg ball moving at 2 m/s?
- 0.085 kg m/s
- 0.34 kg m/s
- 0.68 kg m/s
- 3.4 kg m/s
Answer
B. p = mv = 0.17 × 2 = 0.34 kg m/s.
In a full-on stun shot between equal balls, what happens to the white?
- It bounces back
- It stops dead
- It follows through at the same speed
- It goes off at 90°
Answer
B. All of its momentum passes to the object ball.
After a cut shot with no spin, the two balls separate at about…
- 0°
- 45°
- 90°
- 180°
Answer
C. For equal masses in an elastic collision, the paths are perpendicular.
What makes the white roll back towards you in a draw (screw) shot?
- The cushion
- Back spin and friction from the cloth
- Air resistance
- The other ball pushing it
Answer
B. The spin survives the collision and the cloth’s friction drives the ball backwards.
A cushion returns 70% of a ball’s speed. What fraction of its kinetic energy does it keep?
- 30%
- 49%
- 70%
- 100%
Answer
B. Kinetic energy depends on speed squared: 0.7² = 0.49.
Which quantity is conserved in every collision with no outside force?
- Kinetic energy
- Speed
- Momentum
- Spin
Answer
C. Momentum is always conserved; kinetic energy only in elastic collisions.
Going further
- Marble lab: roll a marble into two touching marbles in a line, then three. How many move off? Explain using momentum and energy.
- Calculate: use the momentum calculator for a heavier cue ball (say 0.2 kg) hitting a 0.17 kg ball. Does the white still stop dead? What would happen?
- Research: why do snooker players chalk the cue tip, and how does a miscue happen?
Calculators for this lesson
Curriculum links
- NGSS HS-PS2-2: use mathematical representations to support the claim that the total momentum of a system of objects is conserved when there is no net force on the system.
- GCSE Physics (England): momentum (p = mv) and conservation of momentum in collisions.
- NGSS MS-PS2-1: apply Newton’s third law to design a solution to a problem involving the motion of two colliding objects.
The science in this plan matches the notes and sources under Trick Shot Pool. Free to use and adapt for teaching. Ideas or corrections: hello@notebookfun.com.