Draw a Sled Track: lesson plan
Students draw tracks for a sledder to ride and use them to discover that speed comes from height, that friction and drag steal energy, and exactly how fast a sled must go to survive a loop-the-loop.
- Ages
- 11–16 (grades 6–10)
- Time
- 60 minutes
- Subject
- Physics: energy conservation, friction and circular motion
- You need
- Devices with a browser (one per pair; a mouse or touch screen makes drawing easier), calculators, squared paper; optional marble and foam pipe insulation cut in half for a real track
Open Draw a Sled Track Jump to the quiz
Learning objectives
By the end of the lesson, students can:
- Describe the transfer from gravitational potential energy to kinetic energy as a sled descends, and use v = √(2gh) to estimate its speed.
- Explain how friction and air resistance transfer some energy to heat, so a real sled never climbs back to its starting height.
- Calculate the minimum speed needed at the top (√(gr)) and the bottom (√(5gr)) of a loop, and the minimum starting height (2.5 times the radius) for a frictionless loop.
- Plan, test and improve a design using evidence from repeated runs.
Key vocabulary
- Gravitational potential energy
- Energy stored because of height: Ep = m g h, with g = 9.81 N/kg.
- Kinetic energy
- Energy of movement: Ek = ½ m v².
- Conservation of energy
- Energy is never created or destroyed, only transferred between stores. On a frictionless slope, Ep lost = Ek gained.
- Friction
- A force that opposes sliding. Steel runners on ice have a coefficient of friction of about 0.03, so sleds keep going on gentle slopes.
- Air resistance (drag)
- The push of air against a moving object. It grows with the square of the speed.
- Centripetal force
- The inward force needed to make something move in a circle: F = m v² / r.
- Terminal speed
- The steady speed reached on a long slope when drag and friction balance the pull of gravity along the slope.
Background for the teacher
The game simulates a sled under gravity (9.81 m/s²), the push of the track, friction and air drag. Pencil lines are snow with a little friction, blue ice lines have none, red marker lines are boosters that push the sled along, and green lines are scenery the sled passes through. With no friction, every metre of height lost becomes speed: v = √(2gh). A 5 m drop gives about 9.9 m/s (36 km/h); the "Ton up" mission asks for 100 km/h (27.8 m/s), which needs a drop of at least v²/2g ≈ 39 m even before losses. Friction and drag transfer some energy to heat, so a sled never climbs back to its starting height.
A loop is the classic test. At the top, the track can only push down, so gravity alone must supply the centripetal force: mv²/r ≥ mg, giving v ≥ √(gr). For a 2 m radius loop that is 4.4 m/s at the top. Climbing 2r = 4 m costs energy, so the sled needs at least √(5gr) ≈ 9.9 m/s at the bottom, which means starting at least 2.5r = 5 m above the bottom of the loop on frictionless ice, and higher on snow. Entering a perfect circle at that speed would press the rider with 6 g at the bottom, which is why real roller coasters use teardrop-shaped loops. The rider is a small ragdoll tied to the sled: land too hard or upside down and the ties break.
Warm-up (5 minutes)
- Ask: "Where does a sled get its speed from? Could a sled ever go higher than where it started?" Collect answers.
- Ask: "Why can a sled glide a long way on ice but stop quickly on fresh snow or grass?"
- Show a photo of a roller coaster loop. Ask: "Why don’t people fall out at the top?"
Activity with the game
- Pairs open Draw a Sled Track and play Mission 1, First Hill: pick the pencil, draw a slope from the sledder to the flag, press Play. Press Stop to edit; undo and the eraser fix mistakes.
- Height test: on Long Glide or a free-mode page, draw the same shape of slope twice, once with pencil (snow) and once with blue ice. Students compare how far the sled travels on the flat afterwards and explain the difference using friction.
- Up and Over, Mind the Gap and Uphill Rocket: students predict, before pressing Play, whether the sled has enough energy to clear each rise. Introduce the red booster line on Uphill Rocket as an energy input.
- Loop calculation: before The Loop, pairs choose a loop radius (for example 2 m) and calculate the minimum speed at the top (√(gr)), at the bottom (√(5gr)) and the minimum starting height above the loop bottom (2.5r). Then draw and test. Record how much higher than 2.5r they actually needed on snow.
- Landings: play Hang Time (three seconds in the air) and The Ledge. Students discover that landing on a slope matching the sled’s path keeps the rider on; a flat or upward landing causes a wipeout. Link to impulse: a gentle landing changes the momentum over a longer time.
- Speed mission: attempt Ton up (100 km/h). Pairs calculate the frictionless height needed (about 39 m) and compare with what worked.
- Plenary: pairs share their best loop and explain, using energy and force, why it worked.
Discussion questions
- Why did the sled go further on blue ice than on pencil snow?
Show a model answer
Ice has no friction in the game, so the only energy losses are to air resistance. On snow, friction transfers some kinetic energy to heat on every metre, so the sled slows down sooner.- Can a sled ever reach a point higher than where it started without a booster?
Show a model answer
No. At best, with no friction or drag, all the kinetic energy could turn back into potential energy at the starting height. Any losses mean it peaks lower. A red booster line adds energy, which is the only way to climb higher.- Why does a loop need a minimum speed at the top?
Show a model answer
To go round a circle the sled needs an inward (centripetal) force of mv²/r. At the top, gravity points inward and the track can only push inward too. If the sled is slower than √(gr), gravity alone is more than enough, so it falls off the track.- Why does the starting height need to be at least 2.5 times the loop radius?
Show a model answer
At the top of the loop the sled must still have speed √(gr), so kinetic energy ½mgr, and it is 2r above the bottom. Total energy needed is mg(2r) + ½mgr = mg(2.5r). That must come from the starting height, so h ≥ 2.5r, before any friction.- Why do landings that slope downhill keep the rider on?
Show a model answer
If the landing slope matches the sled’s falling path, only a small part of its velocity has to be stopped, and over a longer time. A flat landing stops all the downward speed suddenly, which means a huge force, and the rider’s ties break.
Common misconceptions
- A heavier sled goes faster down a frictionless slope.
- Both mass terms cancel in mgh = ½mv², so speed depends only on the height dropped. In real life heavier sleds can go slightly faster because drag matters less relative to their weight.
- Something pushes you outward at the top of a loop (centrifugal force), and that holds you in.
- There is no outward force. Your body tends to keep moving in a straight line, and the track must push you inward to curve your path. You stay on as long as you are fast enough for the track to need to push.
- Energy is lost when a sled slows down on snow.
- Energy is transferred, not lost: friction and drag heat the snow, runners and air. The total stays the same.
Quick quiz
A sled slides down a frictionless 5 m drop from rest. About how fast is it going at the bottom?
- 5 m/s
- About 10 m/s
- About 25 m/s
- 49 m/s
Answer
B. v = √(2gh) = √(2 × 9.81 × 5) ≈ 9.9 m/s.
Which energy store increases as the sled goes down the hill?
- Gravitational potential
- Kinetic
- Elastic
- Nuclear
Answer
B. Gravitational potential energy decreases and kinetic energy increases.
What is the minimum speed at the top of a 2 m radius loop? (g = 9.81 m/s²)
- About 2 m/s
- About 4.4 m/s
- About 9.9 m/s
- About 20 m/s
Answer
B. v = √(gr) = √(9.81 × 2) ≈ 4.4 m/s.
On frictionless ice, how high above the bottom of a 2 m radius loop must the sled start?
- 2 m
- 4 m
- 5 m
- 10 m
Answer
C. h ≥ 2.5r = 2.5 × 2 = 5 m.
Why does a real sled stop on the flat after a hill?
- Gravity pulls it backwards
- Friction and air resistance transfer its kinetic energy to heat
- It runs out of mass
- The snow pushes it up
Answer
B. Resistive forces do work against the motion, transferring kinetic energy to thermal energy.
What is the main job of the red booster line?
- It removes friction
- It adds energy to the sled
- It is only scenery
- It makes the sled heavier
Answer
B. Boosters push the sled along, doing work on it, so it can climb higher than it started.
Going further
- Build a real track: cut foam pipe insulation in half lengthways, tape it to a wall with a loop, and find the lowest starting height at which a marble gets round. Compare with 2.5r (a rolling marble actually needs about 2.7r).
- Calculate: use the potential and kinetic energy calculators to compare the speed after a 10 m drop for a 20 kg child and a 60 kg adult on a frictionless sled.
- Research why real roller coaster loops are teardrop-shaped (clothoid) rather than circles, and what g-force limits designers work to.
Calculators for this lesson
Curriculum links
- NGSS MS-PS3-5: construct, use, and present arguments to support the claim that when the kinetic energy of an object changes, energy is transferred to or from the object.
- NGSS HS-PS3-2: develop and use models to illustrate that energy at the macroscopic scale can be accounted for as a combination of energy associated with the motions of objects and energy associated with their relative positions.
- England National Curriculum, KS3 Physics: energy changes and transfers; forces associated with friction and air resistance; how forces change the speed and direction of motion.
- GCSE Physics (Energy): gravitational potential energy, kinetic energy, conservation of energy and dissipation by friction and air resistance.
The science in this plan matches the notes and sources under Draw a Sled Track. Free to use and adapt for teaching. Ideas or corrections: hello@notebookfun.com.