Impulse and impact force calculator
How hard does something hit? Enter its mass, its speed before and after the impact and how long the impact lasts to get the impulse and the average force.
See it for real: play Egg Drop or play Trick Shot Pool.
The formula
When a force acts on an object for a short time it changes the object’s momentum. That change is called the impulse:
J = F Δt = m v − m u = Δp so F = m(v − u) / Δt
Here J is the impulse in newton-seconds (N·s, the same as kg·m/s), F the average force in newtons, Δt the contact time in seconds, m the mass, u the velocity before and v the velocity after. It is simply Newton’s second law, F = ma, written for a short event: the acceleration is the change in velocity divided by the time it takes.
Why stretching the time saves lives
For an object that stops, the impulse is fixed by its mass and speed: an egg falling 1.8 m always arrives with the same momentum and must lose all of it. What you can change is the contact time. Spread the stop over ten times longer and the average force is ten times smaller. That single idea explains:
- Crumple zones and airbags: a car’s front end and an airbag stretch a crash from a few milliseconds of metal on metal to around 70–100 ms, cutting the force on the occupants many times over.
- Bending your knees when you land: a stiff-legged landing from a 1 m jump stops you in perhaps 10 ms; bending your knees stretches that to 100 ms or more.
- Crash mats, cycle helmets and egg packaging: foam crushes slowly, lengthening the stop.
- Catching: drawing your hands back as you catch a cricket ball turns a painful slap into a soft catch.
Bounces need more impulse than stops
Velocity has a direction, so a ball that bounces back has its momentum reversed, not just removed. A 57 g tennis ball arriving at 20 m/s and leaving at 15 m/s the other way has a change in velocity of 35 m/s, not 5 m/s, and an impulse of 2.0 N·s. Enter the rebound speed as a negative number to get this right. This is also why bouncy collisions can be more damaging to the surface than ones where the object simply stops.
Typical contact times and forces
| Impact | Contact time | Average force |
|---|---|---|
| 60 g egg at 6 m/s on a hard floor | about 2 ms | about 180 N (over 300 × its weight) |
| Same egg into 5 cm of soft foam | about 15 ms | about 24 N |
| Tennis ball off a racquet | 4–5 ms | several hundred newtons |
| Football kick | 8–10 ms | 1,000–1,500 N |
| 75 kg occupant, 50 km/h crash, belt and airbag | about 100 ms | about 10 kN (14 g) |
An egg shell breaks at a point load of roughly 30–40 N, which is why the bare drop smashes it and the foam saves it.
Assumptions and limits
- Average, not peak. Real impact forces rise and fall during contact, often in a rough half-sine shape whose peak is about 1.6 times the average. Damage usually depends on the peak.
- Contact time is hard to know. It is the main source of uncertainty. High-speed video at 1,000 frames per second or a force plate is the usual way to measure it.
- Other forces ignored. During a very short impact the impact force dwarfs gravity, so ignoring weight is fine. For long, gentle stops (over a second) add the weight back in.
Everyday uses
- Design and technology: egg-drop challenges, packaging and protective gear.
- Sport science: estimating the forces in kicks, punches, landings and tackles.
- Physics homework: force–time graphs, where impulse is the area under the curve.
The whole of Egg Drop is an impulse problem: every straw, sponge and parachute in the game works by either lowering the landing speed or stretching the stopping time. In Trick Shot Pool the cue gives the white ball an impulse in a few milliseconds.
Worked example
A footballer strikes a stationary 0.43 kg ball and it leaves the boot at 30 m/s (108 km/h). The foot is in contact for about 9 milliseconds. What is the impulse and the average force?
| Mass | 0.43 kg |
|---|---|
| Velocity before impact | 0 m/s |
| Velocity after impact | 30 m/s |
| Contact time | 9 ms |
| Impulse (change in momentum) | 12.9 N·s |
| Average force | 1433 N |
| Force as a multiple of its own weight | 339.8 × weight |
| Average acceleration during contact (size) | 339.9 g |
An impulse of 12.9 N·s delivered in 9 ms needs an average force of about 1,430 N, over 300 times the ball’s weight and about the weight of a 146 kg mass. The peak force during the kick is roughly one and a half times the average.
Frequently asked questions
- What is impulse in physics?
- Impulse is force multiplied by the time it acts, J = FΔt, and it equals the change in momentum, Δp = mv − mu. Its unit is the newton-second (N·s), which is the same as kg·m/s.
- How do you calculate impact force?
- Average force = change in momentum ÷ contact time. A 70 kg person landing at 4.4 m/s (a 1 m jump) and stopping in 0.1 s feels 70 × 4.4 / 0.1 ≈ 3,100 N, about 4.5 times their weight.
- Why do airbags reduce injury?
- They do not change the occupant’s momentum, which must fall to zero either way, but they stretch the stopping time and spread the force over the chest and head. Doubling the stopping time halves the average force.
- Is impulse a vector?
- Yes. It points in the same direction as the average force and the change in velocity. A ball that bounces straight back receives an impulse pointing away from the wall, larger than if it had simply stopped.
- What is the unit of impulse?
- The newton-second (N·s). One N·s is the impulse from a force of 1 newton acting for 1 second, and it changes the momentum of a 1 kg object by 1 m/s.
- How is impulse related to a force–time graph?
- Impulse is the area under a force–time graph. For a constant force it is a rectangle, F × t; for a real impact it is the area under the curved spike, which equals the average force times the contact time.
Sources
- Impulse (physics), Wikipedia
- Impulse of force, HyperPhysics (Georgia State University)
- Momentum, Wikipedia
- Crumple zone, Wikipedia
Related calculators
- Momentum Calculator: Enter the masses and velocities of two objects moving along a line. Get their total momentum, then the result of a head-on collision where they stick together or bounce perfectly.
- Force Calculator: How much force does it take to speed something up? Enter a mass and an acceleration to get the force in newtons, using Newton’s second law.
- Free Fall Calculator: How long does something take to fall, and how fast is it going when it lands? Enter a height and get the answer, ignoring air resistance.
- Kinetic Energy Calculator: How much energy does a moving object carry? Enter its mass and speed to get its kinetic energy, its momentum and the height it would have to fall from to reach that speed.
Checked against the sources above. Last reviewed 2026-11-11. Calculators give estimates from standard formulas; see our disclaimer.

